Smart LED Night Light - Voice Activated USB Desk Lamp with RGB Color Changing, Rechargeable 5W for Bedroom, Nursery, Office & Study Room

Shell material: ABS+PC Accessories include:LED light X1manual X1USB charging cable X1cartoon sticker Product instructions:1). Press the power switch to turn on the power, and the warm white light is on;2) In the warm white light mode, press the "brightness adjustment button" on the left to adjust the light brightness in 5 levels;3) When the light is on, press the "MODE" button on the right to cycle through multiple lighting modes. When in the white light or RGB color mode, press the "voice control switch button" on the left to enter the voice control color flashing mode. When the sound is sensed During vibration and vibration, the colored lights will flash with the sound. In the voice control mode, pressing the'MODE' button will exit the voice control mode and enter other modes;4) Mobile phone charging: Plug one end of the USB cable into the Type A USB port of this product, and connect the other end to a mobile phone or other electrical equipment, which can charge/power the mobile phone and other electronic devices. During this process, the blue indicator light is on , When the battery power is low, the blue indicator light will flash for a few seconds to indicate low power, then the Type A USB interface will stop power output, and the blue indicator light will go out at the same time;5) Charge the product: When the battery is low, please use the charger to connect to the Micro USB charging port on the product through the USB cable. The red indicator light flashes during charging. The charging time is about 4 hours. The red indicator light will be fully charged. Always bright.6) Install/replace the battery: Use a Phillips screwdriver to unscrew the battery cover at the bottom of the product, and then lift the battery cover to remove or insert the battery. When installing the battery, you need to distinguish between the positive electrode and the negative electrode