Combriller 3157 LED Bulb Amber Yellow - 3056 3156 3057 4157 LED Replacement Bulbs for Turn Signal, Brake & Tail Lights - Car, RV, Truck Blinker Bulbs (2-Pack) - Perfect for Night Driving & Enhanced Visibility

Combriller 3157 3156 3056 LED Bulb Super Bright for Reverse Backup Light, Parking Light, DRL, Tail Light, Turn Signal Light Combriller 3157 led bulbs has 58-SMD LED Chipset on each bulb, 300% Brighter than halogen bulbs, increased brightness makes you noticed when reversing/braking/turning around. Combriller 3156/3157/4157 LED Bulbs Super Bright: Combriller 3157 LED bulb is built with 54-SMD 3014 LED chips and 4-SMD 3030 LED chips and, delivering 360 degree full angle illumination with projector lens design, 300% Brighter than halogen bulbs.PLUG AND PLAY: Non-polarity design, this 3157 LED bulb is built with 1:1 same socket as halogen bulb, ensures a perfect electrical fit with your car, plug and play in 20 minutes.Fitment: 3157, 3056, 3156, 3047, 3057, 3457, 4057, 4114, 4157, 3156NA, 3156A, 3057A, 3157A, 3157NA, 3457A, 3457K, 3457NA, 4157NA, 5702 ect50w Load resistor might be needed to prevent the hyper flash when replacement for Turn Signal Lights Specification Color: 6,500K White LED Chips: 54SMD 3014+4SMD 3030 Lumen: 1,800LM/per bulb Power: 4.2W/PC Current: 300MA Voltage: 9-30V Lifespan: 50,000 Hrs These 3157 LED bulbs support dual brightness when working. If your stock halogen bulb has two wires every side on the plug, such as 3057/3157/4157, etc, these 3157 led bulbs will work in dim mode in tail lights and daytime running lights, and work in bright mode in brake lights, turn signal lights and reverse lights. If your stock halogen bulb only has a wire every side on the plug, such as 3155/3156/3156K, etc, these 3156 led bulbs will all work in bright mode in tail lights, daytime running lights, brake lights, turn signal lights and reverse lights. These 3157 led bulbs can be used for Reverse Back Up Lights, Turn Signal Lights, brake Lights , DRL, Tail Lights, Parking Lights, Side Marker Lights, etc. Extra load resistor or flash relay might be needed to prevent the error code or hyper flash issue when replacement for Turn Signal Lights.