Universal LED Boost Driver Board 15-24 Inch for DIY Lighting Projects - Multi-Interface LED Boost Board Kit 10-28V - Perfect for LED Lamps, Home Lighting & DIY Electronics Power Supply

Specification: Color: blue Interface definition: Output 12 interfaces -3 + 4-3 -4 + 2-4 +3 - 9 -1 + 1 -2 + 2-2 electronic wire -2 + 2-2FFC -4 + 2-4 -3 + 4-3 -5 + 2-5 * 2 Small mouth * 2 :10P 3- 4+ 3- :3- 4+ 3- 6 , .LED, LED, LED, LED, LED, LED. :3,9V, LED. 12pin: -5+2-5 10pin: -3+4-3 10pin: -4+2-4 12pin: +3-9 6:-2+2-26 1.06Pin: -2+2-2 2: BH2.0 :BH 3.5 Size: 12.3 * 3.1cm / 4.8 * 1.2in Weight: approx. 28g Package list: 1 * Booster Board 6 * Flat Cable LED high voltage board conversion instructions 1: Connect the power, ground, and switching signals required by the booster board to the general-purpose LED booster board. VCC power switch signal, brightness control, ground Tip: The connection method is the same as the LCD high voltage board 2: Use a multimeter to measure the number of LED strips is the number of lines, the number of lines is a few negative numbers, the number of lines is several lines The lines are only at the more positive and negative points. The work of science and technology should not see the definition of the original elevator board. Product Name: Super universal interface 2P 6P 10P 12P full interface universal LED boost board LED high voltage board Not all interfaces are soldered, we have pre-installed one or more details as described above Warm reminder: LED connection must pay attention to the interface definition only the positive and negative points, the positive input power supply must not be reversed or wrong, the connection is not conceited, especially remind, please forgive me. Technical support is not available due to conditions. You should know how to use it