12V Touch Switch with Isolation Protection - Stepless Dimmer Control for LED Lamps, DIY Mirror & Table Lighting Accessories | Perfect for Home, Office, and Decorative Lighting Projects

Feature This switch is suitable for LED lamps with medium (such as glass, acrylic, plastic, ceramic, etc.) lamp body. It can realize touch function under isolation protection and has high safety performance.Touch on and off function: When the human body clicks and touches (the touch duration is less than 550ms), the light can be controlled on and off. Click the touch once, the light is on; click again, the light is off. So cycle.Touch dimming function: When the human body presses and touches for a long time (the touch duration is greater than 550ms), the light can be adjusted steplessly. One long press of the touch, the light brightness gradually increases, when the light is released, the light brightness stops at the corresponding brightness at the moment of release, if the long press time exceeds 3 seconds, the light brightness will not change after reaching the maximum brightness; long press the touch again, The brightness of the light gradually decreases, and the brightness of the light stops at the corresponding brightness when the release is released. If the long press time exceeds 3 seconds, the brightness of the light will not change after reaching the minimum brightness. So cycle.It can ensure the safe use of electricity for users, and has a surge absorber, which can effectively prevent the outside world and the interference to the outside world.Suitable for LED light source with medium (such as glass, acrylic, plastic, ceramic, etc.). Feature This switch is suitable for LED lamps with medium (such as glass, acrylic, plastic, ceramic, etc.) lamp body. It can realize touch function under isolation protection and has high safety performance.Touch on and off function: When the human body clicks and touches (the touch duration is less than 550ms), the light can be controlled on and off. Click the touch once, the light is on; click again, the light is off. So cycle.Touch dimming function: When the human body presses and touches for a long time (the touch duration is greater than 550ms), the light can be adjusted steplessly. One long press of the touch, the light brightness gradually increases, when the light is released, the light brightness stops at the corresponding brightness at the moment of release, if the long press time exceeds 3 seconds, the light brightness will not change after reaching the maximum brightness; long press the touch again, The brightness of the light gradually decreases, and the brightness of the light stops at the corresponding brightness when the release is released. If the long press time exceeds 3 seconds, the brightness of the light will not change after reaching the minimum brightness. So cycle.It can ensure the safe use of electricity for users, and has a surge absorber, which can effectively prevent the outside world and the interference to the outside world.Suitable for LED light source with medium (such as glass, acrylic, plastic, ceramic, etc.). Parameter Working voltage DC: 6-12V Load type LED light source and various DC electrical appliances Load power ≤12W Dimensions 49×34×15mm Wiring mode connect the red wire and black wire to the "+ -" 6V-12V input, and then connect the red wire to the blue wire to the load. Yellow contacts the touch point.